Microporous pure titanium aeration head with industrial pure titanium powder (purity 99.6899%) as the main raw material, through high temperature and high vacuum

sintering. Its pore structure is uniform, micropore aperture 0.22-100 m, porosity 35%~50%, small filtration resistance, high separation, purification efficiency, good

mechanical performance, spherical bottom diameter 100mm~180mm, 3mm thickness, 0.1~2mm, aeration bubbles, and aeration resistance, large gas and liquid

boundary area, uniform bubble diffusion, will not produce hole obstruction, strong corrosion resistance, than the conventional aeration energy consumption reduced by

40%, increase sewage treatment capacity nearly twice. Flat-panel ozone titanium aeration head is one type of titanium aeration. Usually, we have three types of aeration

heads: mushroom titanium head, flat-panel titanium aeration head, and tube type aeration.

titanium aeration head

metal aeration head

Flat-panel ozone titanium aeration head

Product Features

1. Uniform pore size, high porosity, and stable pore shape;

2. The bubbles diffuse evenly, the diameter of the aeration bubbles is small, and the gas-liquid interface area is large;

3. Small filtration resistance, high separation and purification efficiency, and good mechanical properties;

4. Good chemical stability, acid, and alkali corrosion resistance, and good oxidation resistance;

5. Non-magnetic, non-toxic, non-shedding, non-polluting, good biological compatibility

6. Easy to clean and long service life.

Service life is up to 10 years. It is especially suitable for the construction and expansion of urban sewage and large water plants and the renovation of old aeration pools, especially the strong acid, strong alkali, and ozone aeration pools.

The titanium aeration head has the advantages of strong corrosion resistance, high acid and alkali resistance, and long service life. This product is suitable for urban sewage, the new expansion of large water plants, and renovation of old aeration tanks, as well as ozone aeration in the water treatment industry, catalytic gas aeration in the chemical industry, etc.

Product details:

titanium aeration head

Pure titanium aeration head

metal aeration head

Cleaning method

1. For decarbonization and filtration in the pharmaceutical and chemical fields, backflushing and backwashing methods combined with ultrasonic cleaning are often used to achieve the best results.

2. In the water production industry, because most of the water-insoluble salts and oxides retained on the surface of the filter element are soaked in 5% nitric acid, the cleaning effect can be achieved without ultrasonic cleaning.

3. Filtration of raw liquid should be combined with the chemical properties of pollutants, and the following methods should be used for cleaning: Alkaline washing, Pickling, and Organic pollution can be combined with surfactant cleaning, If conditions permit, it is best to combine with an ultrasonic cleaner.