Titanium Wire Braided Mesh

Material: TA1, TA2, GR1, GR2

1. Black pure titanium wire Ti≥99.6% (suitable for shipbuilding, seawater filtration, and other industries)

2. Bright pure titanium wire (suitable for electrode production, battery collecting network, fine chemical filtration)

3. Medical titanium wire (suitable for making medical instruments)

Hole shape: square aperture: 0.02mm-50mm

Mesh: 0.3 mesh -400 mesh

Width: 5 mm - 2000 mm

Titanium mesh performance: acid resistance, alkali resistance, high-temperature resistance, wear resistance, and other properties.

Titanium mesh use: the manufacture of titanium mesh filter element, titanium filter, titanium anode, titanium collecting network, and titanium shielding network.

Titanium Plate Stretching Mesh

Titanium mesh, titanium anode, titanium anode material: TA1, TA2 titanium content ≥99.6%

Thickness: 0.1 mm to 1.2 mm

Hole shape: diamond hole aperture: 1mm*2mm, 2mm*4mm, 3.5mm*6mm, 4mm*8mm, 5mm*10mm, 10mm*20mm

Surface: coated Ruthenium oxide, platinum coating treatment.

Features: After mechanical processing and production of titanium mesh, the hole shape is a diamond hole, with a large opening rate, large surface area, and high strength, due to the acid and alkaline resistance of titanium mesh itself is often used to manufacture battery collecting network, oxygen cathode ion membrane electrolytic cell titanium anode, filter titanium mesh, electroplating anode network, etc.

Titanium Mesh Filter

Material: TA1, TA2

Process: Pure titanium wire fusion welding filter cartridge

Pass type: rectangle, square

Filtration accuracy: ≥0.2mm

Diameter of filter cylinder: 100mm-3000mm

Application: Titanium filter has strong corrosion resistance to seawater, and the design life of a seawater filter barrel is 60 years. Titanium mesh manufacturing of chemical liquid filter screen can withstand high temperature, high humidity, strong corrosion test, titanium mesh can manufacture defogging screen, defoaming device, titanium mesh packing, filter screen, titanium filter cylinder, filter column by combination welding.

How many specifications of titanium mesh?

The production process is divided into three categories: woven titanium mesh, punching titanium mesh, and titanium defogging mesh. The types and specifications of titanium mesh are described in detail below.

The first category: woven titanium mesh, is a pure titanium wire woven production, plain, twill, Zhu Liwen, dense grain, and other types. Among them, plain, twill, and Zhu Liwen filter unit is square or rectangular, and the main specifications such as 1, 2, 10, 40, 60, 100, and 150 mesh. Dense grain titanium mesh filter unit for the warp and weft titanium wire Angle cut circle diameter, the main specifications are 12*64 mesh, 20*110 mesh, 8*85 mesh, 12*90 mesh, dense grain titanium mesh, and large thickness, high strength, stable filtration performance, high filtration accuracy. Braided titanium mesh is mainly used in seawater filtration, chemical industry filtration, medical filtration, and electrolytic cell titanium anode.

The second type: punching titanium mesh, is made of pure titanium plate punching production, the aperture has round, square, triangle, or other shaped holes, diamond relative to woven titanium mesh, punching titanium mesh has the advantages of the short production cycle, low cost, high strength, good flatness and so on. The main specifications are: round hole: plate thickness 1mm aperture 1mm; Plate thickness 1.5mm aperture 1.5mm; Plate thickness 2.0mm aperture 3mm, diamond hole: 0.5*0.8mm; 0.8 * 1.5 mm; 1*2mm; 2*4mm; 3*6mm; 5 * 12 mm. It is often used as a filter plate, chemical tower support plate, ion film electrolyzer electrode, battery collecting network, and so on.

The third category: titanium defogging net, is produced by pure titanium wire knitting, and can effectively remove 3--5um of fog droplets, mainly used in tower packing, gas-liquid separation, removal of liquid foam in the air flow, filtering out small liquid foam. Used to separate the gas entrained droplets in the tower, to ensure mass transfer efficiency, reduce valuable material loss and improve the operation of the compressor behind the tower, reduce water content, generally installed at the top of the tower.