High Purity Titanium Block

The details of High Purity Titanium Block

Titanium alloy forgings, titanium alloy squares, chemical titanium squares, aerospace titanium squares

titanium block

titanium forgings

Titanium alloy forging, due to the high cost of materials, is more suitable for forging and forming, 

which not only improves the internal quality of components but also saves metal materials.

Every link of forging more or less affects the internal quality or appearance quality of forgings.

Therefore, each process must be completed in strict accordance with the forging process.

The fixed-size titanium alloy blank for forging can be cut by sawing machine, lathe, anode cutting

machine, punching and shearing machine, grinding wheel cutting machine, or on a forging hammer or

hydraulic press. The main products are titanium rings, titanium cakes, titanium blocks, titanium square

bars, flanges, special-shaped parts, etc.

Titanium forgings have high strength, low density, good mechanical properties, good toughness, and

corrosion resistance. In addition, the process performance of titanium forgings is poor, it is not easy to

cut, and it is easy to absorb impurities such as hydrogen, oxygen, nitrogen, and carbon during thermal

processing. In addition, the wear resistance is poor and the production process is complicated. 

Industrial production of titanium began in 1948. With the development of the aviation industry, the 

titanium industry is growing at an average annual rate of about 8%. At present, the annual output of 

titanium forgings in the world has reached more than 40,000 tons, and there are nearly 30 types of 

titanium forgings. The most widely used titanium forgings are Ti-6Al-4V (TC4), Ti-5Al-2.5Sn (TA7) and 

industrial pure titanium (TA1, TA2, and TA3).

Titanium forgings are mainly used to manufacture compressor parts of aircraft engines, followed by

structural parts of rockets, missiles, and high-speed aircraft. In the mid-1960s, titanium and its alloys

were used in general industries, such as the manufacture of electrodes for the electrolysis industry,

condensers for power stations, heaters for oil refining and desalination, and environmental pollution

control devices. Titanium and titanium alloys have emerged as corrosion-resistant structural materials.

In addition, it is used in the production of hydrogen storage materials and shape memory alloys.

Parameters:

Production Name: GR1 Titanium Block

Standard: ASTM B381

Specifications: 15MMX400MMX400MM

can be customized according to customer needs

Processing Method: Hot forging, wire cutting, water cutting

Material: Pure titanium

Original Place: Baoji, China

Shape: titanium rings, titanium cakes, titanium blocks, titanium square

bars, flanges, special-shaped parts,

Grade: GR1 or GR2, GR5

Package: wooden case for export and carton boxes with plastic bags inside to protect the productions.

Application areas: applied chemical industry, petroleum machinery, aerospace, and water treatment.

The difference between castings and forgings

1. Differences in mechanical properties.

After the secondary processing of the forging, there will be a hardening process, which will result in a fine arrangement and non-directional mechanical properties, which is better than that of castings.

2. The molding method differences.

Castings are melted in a smelting furnace and then poured into the model and cooled to form; forgings are formed by repeated restraint by a press under the effect of pressure.

3. The materials are different.

Castings: composed of molten steel directly cast, with poor and rough grain size, slightly lower metal

density, and poor mechanical stability; gear forgings: After casting, they are formed by

high-temperature forging, with fine grain size, slightly higher density, and stable mechanical properties.

4. Investigate non-processed appearance.

The castings are in the form of small particles, and the drape can be seen (casting the abrasive tool

and the cover); for free forging, the appearance is black after casting, and the appearance is

abbreviated as flakes, and the casting folds can be seen; die forging, at first glance, is a bit different

from the casting. Similar, but the graininess of the exterior is still relatively fine. And die forging is

often done for small parts, and it is difficult to do large parts.

5. Investigation from the processing surface.

Cast iron is significantly different from forgings. The surface of cast iron is not shiny (it will still be

shiny after grinding), the chips of the chips are broken chips, and the gray cast iron will have powdery

chips; the machined surface of cast steel is considered that there is no significant difference from the

forging surface and both have gloss.

6. distinguish the two from the appearance.

The surface of the casting is thicker, and there are segregation and shrinkage holes, while the surface

of the gear forging is smooth and shiny. Because the gear forgings are forged by an external force,

while the castings are solidified.

The characteristics of titanium :

1. Healthy and Environmentally Friendly Metal

2. Lightweight

3. Corrosion resistance

4. Not afraid of extreme cold and high temperature

5. Good heat transfer performance

Contact us

Homepage: http://www.toptitech.com

TEL: +8618992731201

FAX: +860917-3873009

EMAIL: zhangjixia@bjygti.com

ADD: 1502, Block A, Chuang Yi Building

No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China

Hot Tags: high purity titanium block, China, suppliers, manufacturers, customized, usage, pricelist, for sale, in stock, free sample, porous material, mmo ruthenium iridium titanium anode plate for industry water, pure titanium foldable flatware, DSA and Insoluble anode, Gr1 pure titanium dinnerware, titanium dinnerware, mmo titanium solid anode rod for water