20um Sintered SS316L Powder Porous Gas Diffuser With 400mm Tube Connector
video
20um Sintered SS316L Powder Porous Gas Diffuser With 400mm Tube Connector

20um Sintered SS316L Powder Porous Gas Diffuser With 400mm Tube Connector

Uniform bubble generation through narrow pore distribution

Integrated 400mm tube connector reduces leak paths

Depth filtration protects the porous face from fouling

Rigid sintered matrix resists pressure and thermal cycling

316L corrosion resistance in aggressive water and process streams

Send Inquiry
Product Introduction

TOPTITECH's 20 µm Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector is built from gas-atomized 316L stainless steel powder through precision compaction and high-temperature vacuum sintering, forming a rigid three-dimensional interconnected pore network with controlled pore size distribution centered at 20 microns. The 400mm tube connector is integrated as a single sintered or welded assembly, providing a stable insertion length for mounting into sparger headers, reactor side ports, and tank bottom assemblies. This extended connector eliminates separate adapters and reduces potential leak paths while positioning the porous diffusion face at the required depth. Post-sinter flattening and connector alignment hold concentricity and face flatness, ensuring uniform gas distribution across the entire porous surface rather than localized channeling.

 

20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 8

In gas sparging and aeration service, TOPTITECH's 20 µm Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector generates fine, uniform bubbles that increase gas-liquid interfacial area and improve oxygen transfer efficiency in fermentation, wastewater aeration, carbonation, and chemical oxidation processes. The depth-filtration structure retains suspended solids within the porous wall, protecting downstream orifices from blockage while the 316L matrix resists corrosion from chlorinated water, mild acids, and process additives. Ultrasonic cleaning or backflushing restores permeability without damaging the sintered pore architecture, supporting repeated service in brewery carbonation tanks, bioreactors, and industrial water treatment systems. The 400mm tube connector simplifies installation and replacement without disturbing adjacent piping or tank internals.

 

 

Products Specifications

 

20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 1

Material: SS316L

Porous part diameter: 15 mm

Porous part length: 30 mm

Solid tube length: 400 mm (no thread)

Solid tube diameter: 1/4" (6.35 mm)

Pore size: 20μm

Technique: Sintering and laser welding

 

 

SS6L Material

 

product-996-626

 

 

 

Products detailes

 

 

20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 12
20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 13
20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 11

 

 

Products Features

 

01

Uniform bubble generation through narrow pore distribution

Gas-atomized 316L powder and vacuum sintering produce an interconnected pore network with tight pore size distribution around 20 microns. Gas exits through thousands of evenly distributed pore openings, generating fine bubbles with consistent size and minimal coalescence, which raises gas-liquid interfacial area and improves oxygen transfer efficiency in fermentation, aeration, and carbonation processes.

02

Integrated 400mm tube connector reduces leak paths

The extended connector is fabricated as part of the diffuser assembly, eliminating separate adapters, compression fittings, and threaded joints between the porous face and the gas supply line. Fewer mechanical interfaces mean fewer potential leak paths, simpler installation, and faster replacement without disturbing adjacent piping or tank internals.

03

Depth filtration protects the porous face from fouling

Suspended solids and precipitates are retained within the porous wall rather than forming surface cake only. This depth-filtration behavior preserves open pore channels and sustains stable pressure drop across the diffusion face, reducing localized channeling and maintaining uniform gas distribution over extended service intervals.

20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector 9

 

04

Rigid sintered matrix resists pressure and thermal cycling

The fully sintered monolithic body contains no binders, adhesives, or fiber media. It withstands gas pressure surges, backflow pulses, and repeated cleaning cycles without pore collapse, media migration, or particle shedding, maintaining structural integrity where polymer diffusers soften or deform.

05

316L corrosion resistance in aggressive water and process streams

The austenitic stainless steel matrix resists chlorinated water, mild acids, dissolved oxygen, and common process additives. Permeability and mechanical strength remain stable in brewery carbonation tanks, bioreactors, and industrial wastewater aeration where bronze or coated diffusers corrode and plug.

06

Regenerable diffusion face with repeatable performance

Ultrasonic cleaning, backflushing, or mild chemical washing restores permeability without damaging the 20-micron pore architecture or connector geometry. The diffuser can be returned to service after maintenance, reducing replacement frequency and total cost of ownership in continuous aeration systems.

20261106095358105412

 

Products Applications

 

1678344194338

Brewery carbonation tanks and beer maturation vessels – Side-entry or bottom-entry mounting places the 20-micron diffusion face in the beer or wort, where CO₂ is dispersed into fine bubbles for rapid dissolution. The tube connector reaches through the tank wall or top plate, allowing gas supply connection without disturbing tank internals or sampling ports.

Bioreactor and fermenter sparging – Inserted through a side port or headplate adapter, the diffuser delivers air, oxygen, or CO₂ into fermentation broth for dissolved oxygen control and yeast propagation. The 20-micron porous face supports uniform bubble distribution in mammalian cell culture, microbial fermentation, and enzyme production where shear sensitivity and oxygen transfer efficiency both matter.

 

 

Wastewater aeration basins and membrane bioreactors – Mounted on aeration headers or drop-legs in aerobic basins, MBR tanks, and aerobic digesters, the diffuser disperses air or oxygen into mixed liquor. The 400mm connector simplifies header connection and replacement during basin maintenance, while the 316L matrix resists biological fouling and chlorinated backwash water.

 

Ozone contactors and advanced oxidation reactors – Installed in ozone contact columns, oxidation reactors, and AOP skids, the diffuser disperses ozone gas into water or wastewater for disinfection, color removal, and trace organic destruction. The 316L sintered matrix tolerates oxidative service, and the tube connector supports side-entry installation in pressurized contactor vessels.

 

Chemical oxidation, hydrogenation, and gas-liquid reaction loops – Used in stirred-tank reactors, loop reactors, and recirculation skids for hydrogenation, oxidation, chlorination, and stripping duties. The diffuser introduces gas into the liquid phase through the 20-micron porous face, while the 400mm connector allows insertion through reactor nozzles or external circulation piping.

 

Food and beverage nitrogen dosing and carbonation systems – Applied in carbonation columns, nitrogen dosing skids, and beverage blending lines, the diffuser generates fine gas bubbles for precise CO₂ or N₂ dissolution. The 316L construction supports CIP cleaning, and the tube connector enables installation in sanitary piping runs or tank side ports without product contact dead zones.

 

Aquaculture oxygenation and live-fish transport systems – Mounted in oxygenation cones, rearing tanks, and live-haul systems, the diffuser introduces oxygen into water for dissolved oxygen maintenance. The 20-micron porous face produces fine bubbles with long residence time, and the 316L matrix resists corrosion from brackish water and saltwater exposure.

 

Pilot-scale gas-liquid contactors and laboratory sparging rigs – Fitted into bench-scale columns, pilot fermentation skids, and gas-liquid mass transfer test stands, the diffuser provides repeatable bubble generation for scale-up studies. The 400mm tube connector reaches through column flanges or test-cell walls, allowing gas supply connection without modifying the vessel head.

 

 

FAQ

 

 

product-470-408

Q1: Our bubbles are uneven and gas is channeling to one side of the tank - oxygen transfer is poor and our fermentation yield suffers. How does this diffuser fix that?

Uneven bubbles and channeling usually come from a wide pore size distribution or a warped diffusion face. This diffuser is made from gas-atomized 316L powder compacted and vacuum-sintered into a rigid, three-dimensionally interconnected pore network with a tight distribution centered at 20 microns. Gas exits through thousands of evenly distributed pore openings, producing fine bubbles of consistent size with minimal coalescence. Post-sinter flattening and connector alignment hold face flatness and concentricity, so the diffusion face seats uniformly against the mounting point - gas passes through the porous zone instead of leaking around the edge. The result: higher gas-liquid interfacial area, better oxygen transfer efficiency, and more reliable dissolved-oxygen control in fermentation, aeration, and carbonation service.

Q2: We keep chasing leaks at the adapter joints between our sparger and the gas supply line, and every replacement means tearing apart adjacent piping. Is there a simpler installation?

Yes - the 400mm tube connector is integrated as a single sintered or welded part of the diffuser assembly, not an add-on. It eliminates separate adapters, compression fittings, and threaded joints between the porous face and the gas supply line, which removes the most common leak paths at the source. The extended 400mm solid tube (1/4", 6.35 mm, no thread) gives a stable insertion length for sparger headers, reactor side ports, and tank bottom assemblies, and positions the diffusion face at the required depth. Installation and replacement are done without disturbing adjacent piping or tank internals - pull the old unit out, insert the new one, connect the gas line.

Q3: Our current diffusers clog within weeks from suspended solids, and pressure drop keeps climbing until flow distribution collapses. How does this one handle fouling?

This diffuser uses depth filtration instead of surface-only filtration: suspended solids and precipitates are retained within the porous wall rather than forming a surface cake, which preserves open pore channels and keeps the pressure drop stable. This prevents localized channeling and maintains uniform gas distribution over extended service intervals. When maintenance is due, ultrasonic cleaning, backflushing, or mild chemical washing restores permeability without damaging the 20-micron pore architecture - the diffuser goes back into service instead of into the scrap bin, which matters a lot in wastewater basins, MBR tanks, and brewery applications where solids load is high.

Q4: We've tried polymer membrane diffusers that soften and deform, and bronze ones that corrode and plug in chlorinated water. What makes this one survive those environments?

The fully sintered monolithic 316L body contains no binders, adhesives, or fiber media - nothing to soften, migrate, or shed. It withstands gas pressure surges, backflow pulses, and repeated cleaning cycles without pore collapse or structural deformation, which is exactly where polymer diffusers fail. On the corrosion side, the austenitic 316L matrix resists chlorinated water, mild acids, dissolved oxygen, and common process additives, and stays mechanically stable where bronze or coated diffusers corrode and plug. Permeability and strength hold up in brewery carbonation tanks, bioreactors, and industrial wastewater aeration alike.

Q5: Replacement diffusers are a recurring line item in our maintenance budget. What's the total cost of ownership picture over a few years?

Because the diffusion face is regenerable, the replacement cycle is dramatically shortened in practice rather than on paper: ultrasonic cleaning, backflushing, or mild chemical washing returns permeability to service levels without damaging the pore architecture or connector geometry, so one diffuser supports repeated cleaning-and-return cycles in continuous aeration systems. Add the corrosion resistance that avoids unplanned changeouts, and the integrated connector that cuts installation labor and leak-related downtime, and total cost of ownership drops on three fronts at once - fewer replacements, less maintenance labor, and fewer production interruptions. It is a fit-once, clean-and-reuse component rather than a consumable.

 

 

Package and Shipment

 

 

20um Sintered SS316L Powder Porous Gas Diffuser with 400mm Tube Connector

 

heavyweight-pallet-shipping

 

 

 

Contact us

tel.png

Tel: 0917-3873009

phone.png

Phone: +86 18992731201

fax.png

Fax: 0917-3873009

address.png

Address: No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China

address.png

Whatsapp: +86 18992731201

Hot Tags: 20um sintered ss316l powder porous gas diffuser with 400mm tube connector, China, suppliers, manufacturers, customized, usage, pricelist, for sale, in stock, free sample, porous material, 10um Stainless Steel Filter, hydrogen water maker filter, hydrogen-rich water machine accessories, sintered wire mesh astm, Sintered Wire Mesh stainless steel sintered wire mesh 5 layer sintered wire mesh sintered wire mesh filters sintered wire mesh filter elements sintered woven wire mesh sintered wire mesh astm, sintered woven wire mesh filter

(0/10)

clearall