Gr2 Titanium Plate for Sales

1. Titanium plates have many excellent properties.
2. Titanium has a density of 4.54g/cm3, which is 43% lighter than steel, and titanium plates are slightly heavier than the venerable light metal magnesium.
3. The mechanical strength is about the same as steel, twice as strong as aluminum, and five times stronger than magnesium.
4. Titanium is high-temperature resistant, with a melting point of 1942K, nearly 1000K higher than gold, and nearly 500K higher than steel.
5. Titanium is pressed into a plate by a special process to become a titanium plate

Send Inquiry

Titanium plate manufacturing process:

Hot rolling is a rolling process at a temperature higher than recrystallization.

Cold rolling process in which the plastic deformation temperature is lower than the recovery temperature.

Annealing: The process of heating titanium slowly to a certain temperature, holding it for a sufficient time, and then cooling the metal at a suitable rate for heat treatment (usually slow cooling, sometimes controlled cooling).

Pickling: Immersion of a product in an aqueous solution, such as sulfuric acid, to remove a thin film, such as oxide, from the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes.

20220408110036492908acbe6d42169af4c9e21fd9c557

Titanium Plate Properties (Theoretical)

Molecular Weight 47.86 Appearance Silvery Melting Point 1668 °C Boiling Point 3560 °C Density 4.54 g/cm3 Solubility in H2O N/A Crystal Phase / Structure Hexagonal Electrical Resistivity 42.0 microhm-cm @ 20 °C Electronegativity 1.45 Paulings Heat of Fusion 14.15 kJ/mol Heat of Vaporization 425 kJ/mol Poisson's Ratio 0.32 Specific Heat 0.125 Cal/g/K @ 25 °C Tensile Strength 140 MPa Thermal Conductivity 21.9 W/(m·K) @ 298.2 K Thermal Expansion 8.6 µm·m-1·K-1 (25 °C) Vickers Hardness 830–3420 MPa Young's Modulus 116 GPa

The types of titanium plates we can provide

Titanium Alloy Plate