Name: The Most Popular Seven Types Filtration Elements Customized Suppliers, Manufacturers - Free Sample - TOPTITECH Metal Materials
Brand: TOPTITECH
SKU: 186604799

TopTiTech is located in the eastern part of Baoji, China High-tech Industrial Development Zone, which is well-known in China's Titanium City. It is a technology-based private enterprise specializing in the production, research and development and sales of microporous titanium, stainless steel filter equipment, sintered metal filter materials, and plate filter elements. It is mainly used in petroleum, chemical industry, metallurgy, aviation, electronics, atomic energy, electric power, nuclear industry, Solid-liquid, gas-solid, gas-liquid separation and purification in the fields of pharmaceuticals, environmental protection, refractory materials, and fire-fighting equipment. Our company has successfully applied titanium foam board to oxygenator (artificial lung) and won a high reputation. It is a substitute for traditional filter paper, carbon rod, diatomite, polyethylene filter element and various imported industrial and mining filter elements.

Sintered titanium rod filter

The sintered titanium rod filter element is made of industrial pure titanium powder (purity ≧99.7%) as the main raw material, which is sintered at high temperature. It has the characteristics of uniform structure, high porosity, low filtration resistance, good permeability, high filtration accuracy, acid and alkali corrosion resistance, high temperature resistance and so on. It can be widely used in the separation and purification of solid-liquid and solid-gas. It has excellent performance, can be filtered by suction and filter pressure, does not form secondary pollution, is simple to operate, can be produced online, easy to clean, and has a long service life. The filtration precision is 0.22-100ɥm, the porosity is about 35%, and the interfaces are M20, M30, 222 (plug-in), 226 (snap-in), flat pressure port, 4 points, 6 points (thread), etc. Special interfaces can be customized.

Diameter: ￠15mm-80mm

Length: 10mm-1000mm

Sintered porous titanium plate

The sintered porous titanium plate is made of industrial pure titanium powder (purity ≧99.7%) as the main raw material and sintered at high temperature. Its structure is uniform, the pore size distribution is uniform, the porosity is 30-40%, the filtration resistance is small, the filtration accuracy is 0.22-100ɥm, the separation and purification efficiency is high, the mechanical properties are good, high temperature resistance (can be used normally below 300 ℃), acid and alkali resistance Corrosion, in line with food hygiene and pharmaceutical GMP requirements.

Specifications: thickness over 1mm, diameter ￠2mm-1000mm, special specifications can be customized.

Size: corrugated porous titanium, round porous titanium plate, square porous titanium plate

Sintered titanium aeration head

The sintered titanium aeration head adopts foreign advanced technology, and is made of industrial pure titanium powder (purity ≧ 99.7%) as the main raw material and sintered at high temperature. It has a uniform structure, high porosity, micropore diameter of 0.22-100ɥm, porosity of 30-40%, small diameter of aeration bubbles, large gas-liquid interface area, uniform bubble diffusion, and no pore blockage. It is easy to install and has a long service life. All materials are industrial pure titanium, which has stronger corrosion resistance to chlorine and ozone. It is widely used in aeration devices for ozone, chlorine and oxygen. And the aeration resistance is small, the energy consumption is reduced by 40% compared with the conventional aerator, and the sewage treatment capacity is nearly doubled. The interface form of the aeration head has 4 points, 6 points thread, etc., and the special interface can be customized.

Spherical aeration head: ￠100 ￠150 ￠180

Flat aeration head: ￠125 ￠180 ￠240

Tubular aeration head: length: 10mm-500mm diameter: ￠10-60mm

Sintered titanium fiber felt

The titanium fiber felt by TopTiTech is made according to foreign technical standards, using micron-level pure titanium fibers through a special paving process and a special ultra-high temperature vacuum sintering process. The porosity is 60-80%.

Compared with titanium mesh titanium powder sintered plate, titanium fiber felt has an excellent three-dimensional network porous structure, high porosity, several times larger surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, high porosity, and heat dissipation Good performance, high current density, low voltage, stable performance, long life and so on. It is widely used in various industries such as fuel cell, military industry, aerospace, civil, medical care and so on.. Our company can customize and produce titanium fiber felt with various specifications and properties according to customer requirements.

Size: 1500*1200㎜（can be customized）

Thickness: 0.25㎜、0.40㎜、0.60㎜、0.80㎜、1.00㎜（can be customized）

The titanium electrodes

The full name of titanium anode is titanium-based mixed metal oxide anode (MMO). Also called DSA anode, dimensionally stable anode. It takes titanium as the base material (wire, rod, tube, plate, mesh), and brushes the noble metal coating on the titanium substrate, so that it has good electrocatalytic activity, electrical conductivity and oxidation resistance.The titanium electrodes have table working ability under high current density & Voltage、with high electrolysis efficiency、has table electrolysis ability、high anti-corrosion property and a long working life.

The stainless steel powder sintered filter element

The stainless steel powder sintered filter element is made of stainless steel powder through powder screening, mold pressing, high temperature and high pressure vacuum sintering, and finally cooling and integral molding. By adjusting the powder particle size and process conditions, a porous metal sintered filter element with a wide range of filtration precision can be produced. It has excellent mechanical properties, can be machined such as cutting and welding, and has high compressive strength. The filtration accuracy can be guaranteed, even if it works under high temperature and high pressure, the pore size will not be deformed, and the porosity can reach 35-50%. And the pore size distribution is uniform, the dirt holding capacity is large, the back cleaning is easy, the regeneration ability is strong, and the service life is long. Due to the many advantages of porous metal powder sintered materials, such products are widely used in catalyst recovery, gas-liquid filtration and separation in chemical, pharmaceutical, beverage, food, metallurgy, petroleum, environmental protection fermentation and other fields; various gases, Dust removal, sterilization, and oil mist removal of steam; noise reduction, flame retardation, gas buffering, etc.

Porosity: 35-50%

Filtration precision: 0.2um—100um

Use temperature: ≤600℃

Shape: tube, plate, sheet, disc, ring, rod, cone and plate, strip (customized according to customer needs)

The stainless steel sintered wire mesh filter element

The main point of the stainless steel sintered wire mesh filter element with various interface types is that a large number of high-precision welding processes are used. The sintered mesh filter element is rounded and then welded together. The weld should be rounded. After welding, the weld should be corrected, which can make the whole look more beautiful. Sintered mesh is a porous sintered material made by stacking different structures of each layer of stainless steel wire mesh, and then making it through sintering, pressing, rolling and other processes. It is generally a five-layer structure, which is divided into five parts: protective layer, filter layer, separation layer, reinforcement layer and support layer. This kind of filter material not only has stable filtering precision, but also has high strength and rigidity.