Products
Gr1 Titanium Coaxial Inner Tube With G Thread
The inner tube is the service item
Threads hold the fitting; the end face holds the seal
Low-flow duty without a minimum velocity
Same-metal wetted thread
Assembly without titanium welding

This Gr1 titanium coaxial heat exchanger inner tube is produced from seamless cold-rolled Gr1 commercially pure titanium for chloride-bearing water sides where 316L stainless steel and copper-nickel tubes are susceptible to pitting, crevice corrosion and stress corrosion cracking. In a small coaxial heat exchanger, the tube serves as the inner tube: refrigerant or process fluid passes through the tube side and cooling water passes through the annulus in counterflow. The 3.5 mm wall at 38 mm OD provides an ID of approximately 31 mm and sufficient wall section for G1 female threads at both ends without end thickening or titanium threaded inserts, maintaining a continuous tube wall and avoiding additional joints and dissimilar-metal interfaces.
Both ends carry G1 (BSPP 1 in) female threads formed at the manufacturing stage, with 20 mm effective thread length per end excluding chamfer; the 250 mm overall length includes both threaded ends. The parallel G1 female thread is a mechanical fastening interface and does not provide sealing; sealing relies on a face gasket, O-ring or thread sealant. Standard male fittings screw directly into both ends, eliminating field TIG welding of Gr1 titanium and allowing inner-tube replacement during maintenance. Titanium male fittings or an insulating barrier are recommended where mating fittings are brass, carbon steel or stainless steel, to limit galvanic corrosion and thread galling. Applications include small coaxial heat exchangers, pool heat pumps, seawater aquaculture temperature control and corrosive process fluid cooling.
Products Specifications
|
Material |
Gr1 titanium (TA1 commercially pure titanium) |
|
Dimensions |
OD Φ38 mm × overall length 250 mm |
|
Wall thickness |
3.5 mm (ID approx. Φ31 mm) |
|
End connections |
G1 (BSPP 1-inch) female threads at both ends |
|
Thread length per end |
20 mm effective thread length, chamfer excluded |
|
Length definition |
250 mm overall length includes both threaded ends; effective heat-transfer length approx. 210 mm |
|
Sealing |
Face gasket, O-ring or thread sealant; the G thread form does not provide sealing |
|
Process |
Seamless cold-rolled Gr1 titanium tube |



Products Features
No corrosion allowance on the water side
This Gr1 titanium tube is sized by thread depth and pressure duty, not by an allowance for chloride attack. The wall section stays at its design value, so the water side does not carry extra metal that never gets used. The bore stays open and the tube stays light without trading away service life in chloride water.
The inner tube is the service item
The G1 female threads at both ends let the inner tube be unscrewed and taken out on its own. The outer tube, shell and connected pipework stay installed. Repair work stays at the tube, not at the whole exchanger, so downtime is limited to the tube swap.
Threads hold the fitting; the end face holds the seal
The G1 parallel thread locates and retains the mating fitting, but it does not compress the seal. Sealing sits on the end face, gasket, O-ring or thread sealant. Because the thread does not set seal squeeze, seal compression stays the same each time the fitting is refitted, and thread wear does not change how hard the gasket is pressed.


Low-flow duty without a minimum velocity
The threaded wall keeps breaking up the boundary layer as pump flow is reduced. The bore does not settle into laminar flow at low load, so the tube does not need a minimum velocity to keep heat moving. That suits systems that turn down at night or follow tank temperature rather than a fixed design point.
Same-metal wetted thread
A Gr1 titanium male fitting at each end keeps the wetted thread pair chemically identical. There is no dissimilar-metal couple at the thread, so the joint does not drive galvanic attack. The same-metal pair also avoids rust staining and seized threads that show up when titanium is run against a different metal in chloride water.
Assembly without titanium welding
Standard male fittings screw into both ends. The build line does not need inert-gas purge, hot-work permits or post-weld cleaning on Gr1. Titanium welding stays out of both assembly and repair, so the exchanger can be put together and serviced with ordinary mechanical tools and trade practice.
Products Applications

Pool Heat Pump Systems
Used as the inner tube in pool heat exchangers, where continuous contact with chlorinated water can shorten the service life of conventional metal tubing. The titanium construction is suitable for heat exchange circuits that require long-term resistance to pool-water corrosion.
Seawater Aquaculture Systems
Suitable for temperature-control equipment in marine aquaculture facilities, including fish farms and hatcheries. It can be used to transfer heat between refrigerant or process-fluid circuits and seawater-based cooling systems, helping reduce corrosion-related maintenance.
Industrial Cooling Equipment
Applied in compact coaxial heat exchangers handling chloride-containing cooling water or process fluids. It provides a practical option for equipment operating in environments where conventional stainless steel tubing may require more frequent inspection or replacement.
Corrosive Process Fluid Circulation
Used in process cooling systems where the inner circuit carries refrigerants or industrial fluids and the surrounding circuit contains corrosive water. The titanium tube offers material compatibility for applications where fluid composition makes material selection particularly important.


Modular Heat Exchanger Assemblies
Suitable for compact heat exchanger designs that require a removable inner tube for inspection, cleaning or replacement. The threaded end connections support mechanical assembly and make the tube easier to integrate into modular equipment.
Marine HVAC & Shipboard Cooling Systems
Used in marine air-conditioning and onboard cooling equipment, where seawater is often used as the cooling medium. The titanium inner tube can serve in compact heat exchanger assemblies exposed to chloride-containing water, providing a corrosion-resistant material option for shipboard temperature-control systems.
Custom Manufacturing Options

Our Gr1 titanium coaxial inner tubes can be manufactured to meet different equipment and connection requirements. Customization is available for tube outer diameter, wall thickness, overall length, thread specifications, end configurations and sealing face designs. Both plain-end and threaded-end options can be considered based on the application.
Please provide your drawings or technical requirements for a manufacturing feasibility assessment.
FAQ
Why choose Gr1 titanium for a coaxial heat exchanger inner tube?
Gr1 titanium offers excellent corrosion resistance in many chloride-containing water environments. It is a suitable material choice for applications involving seawater, swimming pool water and other corrosive cooling media, where long-term material durability is an important consideration.
How Does the Titanium Inner Tube Work in a Coaxial Heat Exchanger?
The inner tube provides an independent flow passage for refrigerant or process fluid, while the surrounding annular space carries the second fluid. Heat is transferred through the tube wall between the two fluid circuits without direct contact or mixing.
Can the tube dimensions and thread specifications be customized?
Yes. Customization can be considered for outer diameter, wall thickness, overall length, thread specifications, end configurations and sealing face designs. Please provide your technical drawing or detailed requirements so that we can evaluate manufacturing feasibilit
Contact us
Tel: 0917-3873009
Phone: +86 18992731201
Email: zhangjixia@bjygti.com
Fax: 0917-3873009
Address: No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China
Whatsapp: +86 18992731201
Hot Tags: gr1 titanium coaxial inner tube with g thread, China, suppliers, manufacturers, customized, usage, pricelist, for sale, in stock, free sample, porous material, Coil Strip Thickness 0.2mm Titanium Foils with The Commonly Used Titanium Grades, GR5 titanium sheet ASTM B265, High purity GR1 titanium plate or sheet, High purity titanium round bar welcomed for industry, pure Gr1 titanium wire, titanium foil














