Titanium Mesh With Chemical Resistance

Titanium mesh is mainly used for screening and filtration under acid and alkali environment conditions or gas, liquid filtration, and other media separation. There are three methods: plain weave, twill weave, and dense weave.

The thinnest titanium wire that is reasonably proficient in domestic drawing can reach 0.1mm due to the difficulties of drawing titanium wire. Titanium wire has a low elongation, a high strength, a high degree of elasticity, and a low degree of flexibility. These severely restrict the ability to produce titanium mesh with high mesh. The titanium mesh is available in sizes ranging from 1 mesh to 100 mesh.

The titanium mesh produced by TopTiTech has the following characteristics

1. Stable filtration performance;

2. Fine;

3. Corrosion resistance;

4. Long service life.

The most popular weaving technique for titanium mesh is plain weave, and its key characteristic is that the density of the warp and weft wire diameters is the same.

Petroleum, chemical, chemical fiber, aerospace, and other industries can use twill titanium mesh. It possesses excellent tensile strength, good alkali resistance, high-temperature resistance, and good wear resistance.

The strong corrosion resistance of titanium mesh High-purity titanium mesh forms a layer of dense, strong adhesion, and inert oxide film on the surface in a corrosion-resistant medium environment, resulting in passivation and protecting the titanium mesh substrate from being damaged. Corrosion, so as to achieve strong corrosion resistance; especially in the following environments, the corrosion resistance is better, such as seawater, wet chlorine, chlorite, and hypochlorite solutions, chromate nitrate metal chloride and organic salts, etc. (For example 60% nitric acid, the corrosion rate of pure titanium mesh in nitric acid solution is only 0.001mm.a-1);

Application

Titanium mesh can be used in a variety of industries, including those that manufacture high-temperature resistant filters, ships, military equipment, chemicals, mechanical filters, electromagnetic shielding net seawater desalination filters, high-temperature electric furnace heat treatment supports, petroleum filters, food processing, pharmaceutical filtration, and others.

Precious metal mesh products from TopTiTech

The main metal element content of rare and precious metal mesh is more than 9%. The pure metal is widely used in strong corrosion and ultra-high temperature environment due to its stable material and excellent performance.

Application level: aerospace, military industry, shipbuilding, chemical machinery, vacuum high-temperature equipment, electric power, seawater desalination, medical equipment, and other fields.

There are eight precious metal mesh products in TopTiTech.

1. Name: Titanium Wire Mesh

Grade: TA1 TA2 GR2 GR3 R50250 titanium alloy

Characteristics: Light-specific gravity, high strength, low-temperature resistance,

Resistant to super acid and super alkali corrosive solutions.

2. Name: Nickel Wire Mesh

Grade: N4 N6 Ni200 Ni201

Characteristics: Excellent corrosion resistance to concentrated alkali solution, for carbonate, nitrate, Alkaline, and neutral solution medium of salts such as chlorides and acetates, with excellent corrosion resistance.

3. Name: Tungsten Wire Mesh

Grade: W1, W2, HW91, HW71, HW61

Characteristics: Stable properties, high resistance, high melting point, the highest temperature resistance is 3400 degrees.

4. Name: Molybdenum Wire Mesh

Grade: MO1 MO2 RMO1

Characteristics: High strength, high-temperature resistance, wear resistance, corrosion resistance, and other advantages, widely used in metallurgy, machinery, chemical industry, military industry, missile launch, aviation aerospace, and other fields.

5. Name: Zirconium Wire Mesh

Grade: Zr-1, Zr-3, R60702, R60705

Characteristics: Amazing corrosion resistance, extremely high melting point, super high hardness, and especially for fluoboric acid, and sulfuric acid (concentration<65%), corrosion resistance is better among hydrochloric acid, boric acid, and sulfonic acid.

6. Name: Tantalum Wire Mesh

Grade: Ta1, Ta2, FTa1

Characteristics: Refractory is second only to tungsten and rhenium as the third refractory metal; corrosion resistance is better than Titanium, does not react to hydrochloric acid, concentrated nitric acid, and "aqua regia".

7. Name: Copper Wire Mesh

Grade: T2, T3, H65, C5191

Characteristics: non-magnetic, wear-resistant, good ductility, good sound insulation, filter electron beam.

8. Name: Silver Wire Mesh

Grade: 1C-Ag99. 99, CP99. 99

Characteristics: It has good ductility, and its electrical conductivity and heat transfer are the highest of all metals.

TopTiTech is located in the east area of the Baoji High-tech Industrial Development Zone, which is well-known as “Titanium Valley” in China.

It is a technology-based private enterprise specializing in the production, research and development, and sales of microporous titanium, stainless steel filter equipment, sintered metal filter materials, and plate filter elements.

TopTiTech can design and produce corresponding specifications and models of filter equipment for the different needs of each user, The company has more than 10 sets of equipment, strong strength, heavy credit, abides by contracts, ensures product quality, and has won the trust of our customers.

Contact

TEL: +8618992731201

FAX: 0917-3873009

EMAIL: zhangjixia@bjygti.com

ADD: 1502, Block A, Chuang Yi Building No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China

Hot Tags: titanium mesh with chemical resistance, China, suppliers, manufacturers, customized, usage, pricelist, for sale, in stock, free sample, porous material, Gr1 titanium round bar, titanium alloy weldless pipe, High purity titanium coil, titanium alloy pipe, ASTM B265 Titanium plate, mmo titanium electrode