Working principle of titanium rod filter:
The titanium rod filter from TopTiTech which is made of 304, 316L stainless steel material as the shell,
and the inner filter element is a titanium tube, which has the characteristics of high temperature, high
pressure, strong acid, strong alkali, corrosion resistance, and the filter element can be regenerated
repeatedly.
Metallurgical method is a hollow filter tube made of titanium metal powder without high temperature
sintering. It is widely used in liquid-solid separation in food, beverage, medicine, chemical industry and
other industries, and is especially suitable for large infusion and injection production lines in the
pharmaceutical industry. Decarbonization filtration in . The titanium rod filter uses a titanium powder
sintered filter element, which is generally used for coarse filtration or intermediate filtration. This filter
element has the advantages of high precision, high temperature resistance, corrosion resistance and
high mechanical strength, and conforms to the GMP standard.
Selection principle of titanium rod filter: Titanium rod filter is a high-quality and efficient filtration
equipment, but whether the filter model is suitable or not directly affects the filtering effect. Therefore,
the appropriate filter must be selected in practical application. What is the principle of selection of
titanium rod filter? The following is a brief summary:
1. Inlet and outlet diameter: In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally the same as the diameter of the inlet pipeline.
2. Nominal pressure: Determine the pressure level of the filter according to the highest pressure that may appear in the filter pipeline.
3. Selection of filtration precision: The particle size of impurities to be intercepted is mainly considered, which is determined according to the technical requirements of the medium process.
4. Filter material:
The material of the filter is generally the same as the material of the connected process pipeline. For different service conditions, the filter of cast iron, carbon steel, low alloy steel or stainless steel can be considered.
5. Calculation of filter resistance loss For water filters, under the general calculation of rated flow rate, the pressure loss is 0.52 ~ 1.2kpa. The ideal filtering effect can only be received by selecting the appropriate filtering equipment.
sintered stainless steel powder filter
E-mail: zhangjixia@bjygti.com
Tel: 86-0197-3873009
Work Time:
8:00-11:40
13:40-18:00
