What parameters should be paid attention to when choosing a self-cleaning filter?
Today TOPTITECH will give you some suggestions:
1. Processing flow: Select the pipe diameter corresponding to the self-cleaning filter according to the size of the processing flow.
2. The relevant physical and chemical properties of the filter medium: The acidity and alkalinity of the filter medium is used to select the type of material
3. Concentration of suspended solids in the filter medium. Select the grade of filtration according to the concentration of suspended solids in the medium.
4. Filtration accuracy required by the customer. The filtration accuracy of the filter screen is determined according to the size of the media particles, but it does not mean that the higher the accuracy, the higher the accuracy, the easier it is to block the filter and cause frequent cleaning of the filter.
5. The pressure of the pipeline of the system. The pressure is selected according to the pipeline system, generally 1.0mpa and 1.6mpa, with a higher pressure index of 2.5mpa. The pretreatment of water filtration refers to the removal of suspended solids and colloids in water, and the process required by general water use is called water pretreatment. In addition to the important parameters above, there are some preprocessing methods that you can also refer to.
