The main components of a titanium rod filter include:
1. Cylinder: The primary component of the filter, the cylinder is typically made of materials such as titanium, 304 stainless steel, 316L stainless steel, carbon steel, polypropylene, or carbon steel lined with plastic. It can be insulated or jacketed if required.
2. Filter element: The titanium filter element is a crucial part of the filter, with a precision range of 0.45-100μm. It comes in various lengths (10, 20, 30, 40 inches) and diameters (30, 40, 50, 60, etc.).
3. Pressure gauge: The pressure gauge displays the liquid pressure inside the filter before and during the filtration process. It helps assess the thickness of the filter cake on the titanium rod filter element and the level of clogging.
4. Exhaust valve: The exhaust valve is used to release gas from the cylinder when liquid enters the filter. It is also opened when the filter is being accessed to equalize the pressure inside and outside the filter.
5. Sewage outlet: The sewage outlet is used to discharge impurities accumulated on the titanium rod filter element. It may also be used to drain residual liquid after filtration.
6. Filter interface: Commonly used filter interfaces include 226, 222, M20, M30, etc.
7. Flower plate: The flower plate is responsible for securing the titanium rod filter element in place. It can be fixed or movable and may have grouping arrangements.
8. Inlet and outlet: The inlet is where the raw liquid enters the filter, while the outlet allows the filtered liquid to flow out. They often have a quick-opening structure and can be connected through flanges, screws, etc.
9. Outrigger: The outrigger supports the filter and can have various structures such as fixed, flip, ear seat knot, platform, etc.
10. Sealing ring: Seals are used between the flanges, exhaust valve, pressure gauge seat, and filter cylinder. Sealing rings are also needed between the titanium rod and the flower plate. Commonly used materials for sealing rings include silicone gel, ternary ethylC, rubber, etc., chosen based on the properties of the filtered material.
11. Rocker arm: The titanium rod filter can optionally be equipped with a rocker arm to facilitate the opening and closing of the upper cover.
These components work together to provide efficient filtration in a titanium rod filter system.
