Knowledge

Home/Knowledge/Details

How to adjust the filtration capacity of the stainless steel sintered mesh filter?

  • How to adjust the filtration capacity of the stainless steel sintered mesh filter?

  •  

  • 1. To determine the filtration capacity of the stainless steel sintered mesh filter, check if the filter disc is blocked if the valve is fully open but the flow rate is still low.

  •  

    2. Monitor the medium pressure regularly to ensure that the filtration flow meets the required pressure for optimal filtration effectiveness.
  •  

    3. The installation position and working environment of the stainless steel filter element can affect filtration flow. Different positions and precision levels of the filter element may yield different filtration capacities.
  •  

    4. Adjust the filtration capacity by controlling the amount of stainless steel sintered mesh filter used. This can be achieved by modifying the medium pressure and other relevant conditions based on the desired flow rate.

 

  • What causes emulsification of the filter element and hydraulic oil when using sintered mesh filter material?

  •  

    Failure analysis:
    The emulsification of hydraulic oil occurs when impurities, such as water, enter the oil. This emulsification is more likely to happen in harsh environments and over prolonged periods of use. Several reasons for water entry into hydraulic oil are:
  •  

    1. Poor sealing of welds and flanges, allowing rainwater to seep into the fuel tank.
    2. Moisture condensation from the air due to temperature variations, leading to water droplets falling into the oil.
    3. Water entering the oil through damaged pumping hydraulic cylinders.
    4. Moisture contamination during cleaning, oil changes, and maintenance procedures.
  •  

    Troubleshooting:

    1. Promptly drain any water present. It is recommended to release water by opening the water valve before each work session.


  • 2. Avoid changing oil on rainy days. If oil changes are necessary during rainy weather, take measures to prevent rainwater from entering the fuel tank.


  • 3. Implement waterproof measures when performing repairs on rainy days.

  •  

    Multilayer Sintered Stainless steel Wire Mesh FilterSintered SS Wire Mesh Filter Disc

    Consequences: Emulsification of hydraulic oil affects its ability to provide pressure, resulting in insufficient power for the filter press and negatively impacting production. If oil emulsification occurs, the sintered mesh filter element can help by cutting open the oil bag and releasing the water for proper collection, thus avoiding the consequences of emulsification.
  •  

     

    Precautions in designing acid-resistant sintered mesh filter elements:
  •  

    1) Pore size: The pore size, measured in microns, determines the size of the medium that needs to be filtered.
  •  

    2) Pressure drop: This refers to the pressure loss when liquid or gas flows through the filter. The usage environment should be considered and communicated to the filter manufacturer.
  •  

    3) Temperature range: The choice of metal alloy for the filter element should withstand the temperature range of the working environment.
  •  

    4) Strength: Acid-resistant sintered mesh filter elements are ideal for applications requiring high strength. They also provide consistent strength in both forward and reverse flow.
  •  

    Important considerations for the hydraulic system using stainless steel sintered mesh filter elements:
  •  

    1. Exhaust treatment: After disassembling and cleaning the stainless steel sintered mesh filter element, it should be reassembled carefully. Before reuse, exhaust the air inside by operating the main pump and opening the pipes. Then, inject hydraulic oil to ensure proper functioning of the entire system.
  •  

    2. Attention during opening: Regular major cleaning and maintenance of the stainless steel sintered mesh filter element are necessary to remove oil residue or attachments on the filter element. When opening the device, follow the steps carefully, avoiding omissions and excessive force, and paying attention to protective devices.
  •  

    3. Hydraulic oil change: When changing the hydraulic oil, it is essential to replace the entire stainless steel sintered mesh filter element. Simply cleaning the filter is insufficient and will not yield the desired results of an oil change.

Contact now