Products

Home/Products

Category

Microporous Filter Components and Microporous Filter Elements
- Sintering Titanium
- Powder Sintered Stainless Steel
Non-ferrous Metal Products

80-mesh N6 Nickel Woven Mesh For Hybrid Acid-Alkaline Wat...

Superior Corrosion Resistance Across Dual Electrolyte Environments. . High Electrical Conductivity and Uniform Current Distribution. . Optimized Porosity for Gas Bubble Detachment and Mass Transport.

Add to Inquiry
1mm Thick Titanium Expanded Mesh With Conductor For PEM E...

Material: GR1 Pure Titanium. Thickness: 1.0mm. Diameter: 190mm. Mesh Type: Expanded diamond mesh

Add to Inquiry
Custom Lab-Scale Titanium Multi-Layer Mesh Plate With Dim...

High Structural Strength and Impact Resistance. . Exceptional Corrosion Resistance. . High Fluid Permeability. . High Customization Flexibility. .

Add to Inquiry
Factory Direct Custom 316L Sintered Filter φ10×180mm For ...

Thin-wall construction maintains flow capacity with fine filtration. One-end thread with a solid tip simplifies installation alignment. Porosity tolerance held to ±5%. NPT threads seal directly in

Add to Inquiry
SS316L Porous Metal Sparger For Steam Made in China

High thermal stability. . Superior corrosion resistance. . Uniform pore architecture. . Excellent mechanical toughness. . Efficient bubble generation. . Cleanability and regeneration. .

Add to Inquiry
0.5 Micron Platinum Coated Titanium Felt For PEM Electrol...

Substrate Material: Grade 1 high-purity sintered titanium fiber felt (Ti ≥99.5%). Size: 200 × 200 × 0.25 mm. Porosity: 60% - 70%. Platinum Coating thickness: 0.5μm for double sides adjustable

Add to Inquiry
The Wire Mesh Filter With 350-400 Mesh With SUS304

Material: 304 stainless steel. . Diameter: 33mm. . Length: 100mm. . Filtration rate: 350-400 mesh. . Type: standard 5-layer sintered structure. . Technique: sintering and welding. .

Add to Inquiry
China GR1 Titanium Perforated Disc Manufacturers For Vent...

Even Hole Distribution. Backpressure Control. Simple Mounting. Resistance to Fouling. Corrosion Resistance. Temperature Range.

Add to Inquiry
SS316L Sintered Aerator With 1/4-inch NPT Thread For Gas ...

Material: 316L. . Diameter: 25mm. . Length: 45mm. . Pore size: 20 micron. . Connector: 1/4’’NPT. .

Add to Inquiry
2.0mm Titanium Expanded Mesh For Electrolyzer – Electrode...

In modern electrolysis systems-including alkaline water electrolyzers (AWE), proton exchange membrane (PEM) electrolyzers, chlor-alkali cells, and seawater electrolysis anti‑fouling units-the choice

Add to Inquiry
1mm Pure Zinc Plate For Battery Anode Substrate

High purity for stable electrochemistry. . Optimal thickness for multi-format electrode stacking. . Mechanical integrity for long-cycle life. . Hydrophilic surface for low charge-transfer resistance.

Add to Inquiry
Ir-Ta Coated Titanium Felt For PEM Electrolyzer PTL

Uniform fiber sintered structure with compressible resilience. Resistance to potential transients during start-stop cycles. Low flow resistance and efficient gas-liquid separation. High

Add to Inquiry